The 4 Port PoE Switch(WS-PNS-G4G2 ) provides 4-port 10/100/1000 Mbps IEEE 802.3af/at Power over Ethernet with a total of 130 watts of PoE budget, which is an ideal solution to fulfill the demand of sufficient PoE power for network applications. It is able to drive 4 IEEE 802.3af/at compliant powered devices. It has 2 Uplink Port(10/100/1000).

• 4×10/100/1000 Base-TX PoE ports and 2×10/100/1000 Base-TX uplink ports
• Comply with IEEE802.3, IEEE802.3u, IEEE802.3af/at standards
• Internal 52VDC/2.5A power adapter
• Support desktop and wall mount installation
• Plug and play, no need to configure
• Support two operating modes extend with VLAN isolated, default configuration
• Support 4KV surge protection, 6KV ESD protection
  

  Switch Capacity	12 Gbps Full duplex
  Uplink Ports	2, 1000Mbps; Transmission Distance: 0-100m
  PoE Power Budget	130W
  Anti-thunder Level	Common mode: 2KV Differential mode: 2KV
  ESD	Air discharge: 1.5KV Contact discharge: 1.5KV
  Ethernet Port Light	Light off: Link is disconnected Red light on: Powering but data disconnected Light flash quickly: Data Transmitting
  Network Port	6
  Transmission Distance	0-100m/100 Mbps
  PoE Ports	4, 1000Mbps; RJ45 ports; Max. 30W Output of Single PoE Port Transmission distance:0~100m
  PoE Power Supply	1/2(+), 3/6(-)
  PoE Standard	IEEE802.3af, IEEE802.3at
  Packet Forwarding Rate	1.488Mpps/port
  MAC Address List	2K
  Power Source	Built-in Power Supply, Input: 100-240V AC, 50/60Hz
  Power Consumption	<5W
  Operating Temperature	-10°C~ -50°C
  Humidity	10%-95% , non-condensing
  Storage Temperature	-40°C~70°C
  Dimension	202mm x 140mm x 45mm (L x W x H)